Kloeckner Metals routinely supplies A572, a high-strength, low-alloy structural steel plate, nationwide to its customers.
A572 plate is a high-strength, low-alloy structural steel that includes five grades—42, 50, 55, 60, 65 and 80—according to their minimum specified yield strength. For applications requiring notch toughness, Kloeckner Metals also supplies it charpy tested.
A572 steel plate has good structural quality with an optimal combination of high strength, high notch toughness, good weldability, and high value. Due to its alloying elements, it can be a little more difficult to form and pre-testing of both welding and post-welding heat treatments is recommended.
A572 grades 50, 65, and 80 are seen widely in the solar industry and the wind industry. As a structural steel plate, ASTM A572 grades are common in structural applications across a broad range of market segments.
A572 is often used in construction equipment, bridges, buildings, machinery, freight cars, truck parts, and power transmission poles. Because of its versatility, it is considered a “workhorse” grade and shows up in a huge range of products. A572 grades 50, 65, and 80 steel plate are frequently used in the wind industry where they are often used as base plates for wind turbines and can be custom roll formed to size and welded into wind towers.
A572 is an HSLA steel plate with fair machinability. It can be drilled, countersinked, counterbored, tapped, and milled with conventional equipment and carbide tools.
A572 steel plate is considered to have excellent weldability and can be weld by all conventional methods.
Heat treatment is not required for A572 steel plate. However, it is possible to require a higher level of strength by specifying quenched and tempered steel plates.
A572 steel plate has good structural quality with an optimal combination of high strength, high notch toughness, good weldability, and high value. Due to its alloying elements, it can be a little more difficult to form and pre-testing of both welding and post-welding heat treatments is recommended.
A572 grades 50, 65, and 80 are seen widely in the solar industry and the wind industry. As a structural steel plate, ASTM A572 grades are common in structural applications across a broad range of market segments.
A572 is often used in construction equipment, bridges, buildings, machinery, freight cars, truck parts, and power transmission poles. Because of its versatility, it is considered a “workhorse” grade and shows up in a huge range of products. A572 grades 50, 65, and 80 steel plate are frequently used in the wind industry where they are often used as base plates for wind turbines and can be custom roll formed to size and welded into wind towers.
A572 is an HSLA steel plate with fair machinability. It can be drilled, countersinked, counterbored, tapped, and milled with conventional equipment and carbide tools.
A572 steel plate is considered to have excellent weldability and can be weld by all conventional methods.
Heat treatment is not required for A572 steel plate. However, it is possible to require a higher level of strength by specifying quenched and tempered steel plates.
ANSWER:
ASTM 572 Grade 50 steel has an ultimate tensile strength of 450 MPa (metric) and 65,300 PSI (Imperial). It has a tensile yield strength of 345 MPa and 50,000 PSI.
ANSWER:
Mechanical Properties | Metric | English |
Hardness, Brinell | 135 | 135 |
Hardness, Rockwell B | 74 | 74 |
Tensile Strength, Ultimate | 450 MPa | 65300 psi |
Tensile Strength, Yield | 345 MPa | 50000 psi |
Elongation at Break (in 200 mm) | 18% | 18% |
Elongation at Break (in 50 mm) | 21% | 21% |
Bulk Modulus | 160 GPa | 23200 ksi |
Shear Modulus | 80.0 GPa | 11600 ksi |
ANSWER:
S355 steel is a European standard structural steel. A572 is its US standard equivalent.
The terms “plate mill rolled” and “plate strip mill” refer to two different methods of manufacturing steel plates, including A572 steel. Here’s an explanation of the difference between the two:
In the context of A572 steel, both plate mill rolled and plate strip mill refer to the manufacturing process used to produce A572 steel plates. The choice of method depends on factors such as plate thickness, size, and desired properties. Generally, plate mill rolled A572 steel plates are suitable for thicker sections and heavier applications, while plate strip mill A572 steel plates are used for thinner sections and lighter applications. Both are available to customers for purchase on Kloeckner Direct.
ANSWER:
ASTM 572 Grade 50 steel has an ultimate tensile strength of 450 MPa (metric) and 65,300 PSI (Imperial). It has a tensile yield strength of 345 MPa and 50,000 PSI.
ANSWER:
Mechanical Properties | Metric | English |
Hardness, Brinell | 135 | 135 |
Hardness, Rockwell B | 74 | 74 |
Tensile Strength, Ultimate | 450 MPa | 65300 psi |
Tensile Strength, Yield | 345 MPa | 50000 psi |
Elongation at Break (in 200 mm) | 18% | 18% |
Elongation at Break (in 50 mm) | 21% | 21% |
Bulk Modulus | 160 GPa | 23200 ksi |
Shear Modulus | 80.0 GPa | 11600 ksi |
ANSWER:
S355 steel is a European standard structural steel. A572 is its US standard equivalent.
The terms “plate mill rolled” and “plate strip mill” refer to two different methods of manufacturing steel plates, including A572 steel. Here’s an explanation of the difference between the two:
In the context of A572 steel, both plate mill rolled and plate strip mill refer to the manufacturing process used to produce A572 steel plates. The choice of method depends on factors such as plate thickness, size, and desired properties. Generally, plate mill rolled A572 steel plates are suitable for thicker sections and heavier applications, while plate strip mill A572 steel plates are used for thinner sections and lighter applications. Both are available to customers for purchase on Kloeckner Direct.
X
The Kloeckner Metals website uses modern technologies. Unfortunately, your browser doesn't support those technologies.
Download the latest version of one of these browsers to experience the site: