Metal Supplier Murfreesboro

Branch overview

Set on a 40-acre campus, Kloeckner Murfreesboro is a metal supplier that stocks and processes both ferrous and non-ferrous metals with a focus on value-added processing and finished part manufacturing. Our senior staff are here to provide you with supply chain solutions to reduce waste, eliminate bottlenecks, and partner on the optimal material selection. Our commitment is to your success.

Our Murfreesboro facility is located 35 miles south of Nashville. Murfreesboro is home to Middle Tennessee State University and was once the state capital of Tennessee. With its proximity to Music City, the rolling hills of Tennessee Walking Horse country, and the world famous Jack Daniels distillery, Kloeckner Murfreesboro is strategically located to service the entire southeastern US.

IATF 16949-2016

Branch Gallery

Murfreesboro

650 Butler Street

Murfreesboro, Tennessee 37127

(615) 849-8800

Get In Touch

Information

Facts
- Murfreesboro is a 200,000 sq. ft. facility.
- Murfreesboro carries products such as HRP&O, cold rolled, galvanized, galvannealed, aluminized, prepaint, aluminum, and stainless.
- Murfreesboro delivers daily to Tennessee, Alabama, Arkansas, Georgia, Kentucky, and Mississippi.
- Murfreesboro has a company owned truck fleet with onboard Trimble tracking and navigation systems; next day delivery options are available.
- Murfreesboro is also an IATF 16949:2016 registered quality management system.
Special Programs
The special programs in the Murfreeboro branch consist of:
- Vendor managed stocking programs including Kanban
- Just-in-time programs
- Toll processing
- Fabrication services
- Part Manager – Kloeckner’s Contract Management Portal
Key Equipment
- Type of equipment: Red Bud 72″ precision multi-blanking
  Material Thickness: Carbon, Aluminum = .020“ through .135″; Stainless = .020″ through .075“
  Width: 5.5″ min to 72″ max
  Length Capacity: 15″ min to 172″ max
  Tolerances: Width: +/- .015″, Length +/- .015″
  (120″ and under), +/-.0625″ (over 120”)
  Features: PVC applicator and paper interleave
- Type of Equipment: 60″ Cut to Length
  Material Thickness: Carbon, Aluminum = .036“ through .188″ thickness (.152″ max for stainless)
  Maximum Width: 28″ min. to 60“ max.
  Features: PVC applicator top and bottom
- Type of Equipment: 60″ Cut to Length
  Material Thickness: Carbon, Aluminum = .018“ through .075″ thickness (.065″ max for stainless)
  Maximum Width: 28″ min. to 60“ max.
  Features: PVC applicator top and paper interleave
- Type of Equipment: Shear
- Type of Equipment: 72″ Chicago slitter
  ID: 20″ – 24″
  Material Thickness: Carbon, Aluminum = .008“ through .187″ thickness (.125″ max for stainless)
  Maximum Width: 1″ min. to 72“ max.
  Features: PVC applicator and paper interleave

Facts

Murfreesboro is a 200,000 sq. ft. facility.
Murfreesboro carries products such as HRP&O, cold rolled, galvanized, galvannealed, aluminized, prepaint, aluminum, and stainless.
Murfreesboro delivers daily to Tennessee, Alabama, Arkansas, Georgia, Kentucky, and Mississippi.
Murfreesboro has a company owned truck fleet with onboard Trimble tracking and navigation systems; next day delivery options are available.
Murfreesboro is also an IATF 16949:2016 registered quality management system.

Special Programs

The special programs in the Murfreeboro branch consist of:

Vendor managed stocking programs including Kanban
Just-in-time programs
Toll processing
Fabrication services
Part Manager – Kloeckner’s Contract Management Portal

Key Equipment

Type of equipment: Red Bud 72″ precision multi-blanking
Material Thickness: Carbon, Aluminum = .020“ through .135″; Stainless = .020″ through .075“
Width: 5.5″ min to 72″ max
Length Capacity: 15″ min to 172″ max
Tolerances: Width: +/- .015″, Length +/- .015″
(120″ and under), +/-.0625″ (over 120”)
Features: PVC applicator and paper interleave
Type of Equipment: 60″ Cut to Length
Material Thickness: Carbon, Aluminum = .036“ through .188″ thickness (.152″ max for stainless)
Maximum Width: 28″ min. to 60“ max.
Features: PVC applicator top and bottom
Type of Equipment: 60″ Cut to Length
Material Thickness: Carbon, Aluminum = .018“ through .075″ thickness (.065″ max for stainless)
Maximum Width: 28″ min. to 60“ max.
Features: PVC applicator top and paper interleave
Type of Equipment: Shear
Type of Equipment: 72″ Chicago slitter
ID: 20″ – 24″
Material Thickness: Carbon, Aluminum = .008“ through .187″ thickness (.125″ max for stainless)
Maximum Width: 1″ min. to 72“ max.
Features: PVC applicator and paper interleave