Haley Tool & Stamping

Information

Facts
- 50,000 sq. ft. facility located near Nashville, Tennessee, and close to our American Fabricators and Kloeckner Murfreesboro facilities
- Multiple stamping presses ranging from 50 to 400 tons, in addition to tooling and die maintenance equipment
- Use of in-house dies for hard tool stamping that improves efficiency for larger runs and complex parts
Special Programs
- Tool and manufacturing engineering
- Tool and special machine design
- Custom tool and die fabrication
- Tool and die repair
- Assembly – welding & riveting
- Shearing 10′ up to .125″ thick
- Wire cut EDM
- Parts finishing
- EDI – Electronic data Interchange
- SPC – Statistical Process Control
- Bar coding
- Just-in-time deliveries
- CAD capabilities
Key Equipment
- (1) Stamtec G-160-S
  - 160 tons (metric)
  - 6″ stroke
  - 18 1/2″ shut height
  - 4″ adjustment
  - 49″ x 30″ bolster
  - 35-50 strokes/min. (variable speed)
  - Dynamic 10 x 10 syncor feeder (6 ga.)
  - Cooper-Weymouth 2000# payoff reel
- (1) Verson #75
  - 75 tons
  - 4″ stroke
  - 18″ shut height
  - 4″ adjustment
  - 36″ x 30″ bolster
  - 60-120 strokes/min. (variable speed)
- (1) Verson #100
  - 100 tons
  - 6″stroke
  - 14″ shut height
  - 5″ adjustment
  - 72″ x 24″ bolster
  - 60 strokes/min.
  - Coilmatic LF636 air feed 4″ x 30″ (16 ga.)
  - Littell powered decoiler model 3C Ser. #3400
- (1) Rousselle
  - 30 tons
  - 2″ stroke
  - 11″ shut height
  - 3″ adjustment
  - 20″ x 14″ bolster
  - 130 strokes/min.
- (1) Verson #125-52-66
  - 125 tons
  - 10″ stroke
  - 20″ shut height
  - 6″ adjustment
- (1) Verson #150-GP2-72
  - 150 tons
  - 6″ stroke
  - 22″ shut height
  - 5″ adjustment
  - 72″ x 36″ bed
  - 25-50 strokes/min. (variable speed)
  - Air cushion
  - Dynamic 10″ x 26″ feeder (6 ga. max.)
  - American steel line
  - Powered straightener (10 roll)
  - 36 wide x .100 thick
  - Littlell 4000# powered decoiler
- (1) Warco #G-75-1
  - 75 tons
  - 7″ stroke
  - 13″ shut height
  - 3″ adjustment
  - 32″ x 23″ bolster
  - 45 strokes/min.
- (1) Minster
  - 50 tons
  - 2″ stroke
  - 18 1/2″ shut height
  - 8″ adjustment
  - 28″ x 36″ bed
  - 160 strokes/min.
  - Dynamic 10″ x 10″ feed (6 ga. max.)
  - Littell 1000# powered decoiler
- (1) USI Clearing
  - 60 tons
  - 6″stroke
  - 21″ shut height
  - 3″ adjustment
  - 21″ x 32″ bolster
  - 90 strokes/min.
- (1) Stamtec #G2-250-S
  - 260 tons (metric)
  - 11″ stroke
  - 21 1/2″ shut height
  - 5″ adjustment
  - 36″ x 108″ bolster
  - 20-35 strokes/min.
  - Dynamic programmable servo feed
  - 16 ga. x 36″ infinite length
  - Rowe powered decoiler Ser. #24810
  - #4020-DS’L
- (1) Niagra E60
  - 60 tons
  - 4″ stroke
  - 13 3/4″ shut height
  - 3 1/2″ adjustment
  - 32″ x 21″ bolster
  - 60 strokes/min.
- (1) Stamtec #G2-200
  - 200 tons
  - 10″ stroke
  - 20″ shut height
  - 5″ adjustment
  - 33″ x 95″ bolster-26″ x 73″ ra,
  - 25-45 SPM
  - Dynamic servo feed model #DX2418 Ser. #346882
  - 11 ga. x 18 x infinite length
  - Programmable with 2000# Littell coil cradle
- (1) Stamtec G1-200(2) c-frame
  - 220 tons (metric)
  - 7 7/8″ stroke
  - 4 1/3″ adjustment
  - 55.1″ x 32.3″ bolster
  - 20-50 strokes/min. (variable speed)
  - Dynamic 15″ x 15″ mechanical feeder (10 ga.)
  - Programmable with 2,500# Littell coil cradle

Facts

50,000 sq. ft. facility located near Nashville, Tennessee, and close to our American Fabricators and Kloeckner Murfreesboro facilities
Multiple stamping presses ranging from 50 to 400 tons, in addition to tooling and die maintenance equipment
Use of in-house dies for hard tool stamping that improves efficiency for larger runs and complex parts

Special Programs

Tool and manufacturing engineering
Tool and special machine design
Custom tool and die fabrication
Tool and die repair
Assembly – welding & riveting
Shearing 10′ up to .125″ thick
Wire cut EDM
Parts finishing
EDI – Electronic data Interchange
SPC – Statistical Process Control
Bar coding
Just-in-time deliveries
CAD capabilities

Key Equipment

(1) Stamtec G-160-S
- 160 tons (metric)
- 6″ stroke
- 18 1/2″ shut height
- 4″ adjustment
- 49″ x 30″ bolster
- 35-50 strokes/min. (variable speed)
- Dynamic 10 x 10 syncor feeder (6 ga.)
- Cooper-Weymouth 2000# payoff reel
(1) Verson #75
- 75 tons
- 4″ stroke
- 18″ shut height
- 4″ adjustment
- 36″ x 30″ bolster
- 60-120 strokes/min. (variable speed)
(1) Verson #100
- 100 tons
- 6″stroke
- 14″ shut height
- 5″ adjustment
- 72″ x 24″ bolster
- 60 strokes/min.
- Coilmatic LF636 air feed 4″ x 30″ (16 ga.)
- Littell powered decoiler model 3C Ser. #3400
(1) Rousselle
- 30 tons
- 2″ stroke
- 11″ shut height
- 3″ adjustment
- 20″ x 14″ bolster
- 130 strokes/min.
(1) Verson #125-52-66
- 125 tons
- 10″ stroke
- 20″ shut height
- 6″ adjustment
(1) Verson #150-GP2-72
- 150 tons
- 6″ stroke
- 22″ shut height
- 5″ adjustment
- 72″ x 36″ bed
- 25-50 strokes/min. (variable speed)
- Air cushion
- Dynamic 10″ x 26″ feeder (6 ga. max.)
- American steel line
- Powered straightener (10 roll)
- 36 wide x .100 thick
- Littlell 4000# powered decoiler
(1) Warco #G-75-1
- 75 tons
- 7″ stroke
- 13″ shut height
- 3″ adjustment
- 32″ x 23″ bolster
- 45 strokes/min.
(1) Minster
- 50 tons
- 2″ stroke
- 18 1/2″ shut height
- 8″ adjustment
- 28″ x 36″ bed
- 160 strokes/min.
- Dynamic 10″ x 10″ feed (6 ga. max.)
- Littell 1000# powered decoiler
(1) USI Clearing
- 60 tons
- 6″stroke
- 21″ shut height
- 3″ adjustment
- 21″ x 32″ bolster
- 90 strokes/min.
(1) Stamtec #G2-250-S
- 260 tons (metric)
- 11″ stroke
- 21 1/2″ shut height
- 5″ adjustment
- 36″ x 108″ bolster
- 20-35 strokes/min.
- Dynamic programmable servo feed
- 16 ga. x 36″ infinite length
- Rowe powered decoiler Ser. #24810
- #4020-DS’L
(1) Niagra E60
- 60 tons
- 4″ stroke
- 13 3/4″ shut height
- 3 1/2″ adjustment
- 32″ x 21″ bolster
- 60 strokes/min.
(1) Stamtec #G2-200
- 200 tons
- 10″ stroke
- 20″ shut height
- 5″ adjustment
- 33″ x 95″ bolster-26″ x 73″ ra,
- 25-45 SPM
- Dynamic servo feed model #DX2418 Ser. #346882
- 11 ga. x 18 x infinite length
- Programmable with 2000# Littell coil cradle
(1) Stamtec G1-200(2) c-frame
- 220 tons (metric)
- 7 7/8″ stroke
- 4 1/3″ adjustment
- 55.1″ x 32.3″ bolster
- 20-50 strokes/min. (variable speed)
- Dynamic 15″ x 15″ mechanical feeder (10 ga.)
- Programmable with 2,500# Littell coil cradle

Haley Tool & Stamping

Branch overview

Information

Facts

Special Programs

Key Equipment

Services Provided at Branch

Assembly and Kitting

Drilling

Fabrication Services

Finishing

Machining

Milling

Press Braking

Shearing

Welding

Special Equipment at Branch

Industries Served at Branch

Automotive

Appliance

Construction

Electrical

Military and Government

Other Branches

Outdated or Unsupported Browser Detected